Areca ARC-1882LP User Manual download pdf (Page 169)

169

APPENDIX

C-3-2 Using Onboard NIC Installation

By using the built-in LAN port on the RAID controller- RAID con-

troller using built-in LAN interface. You can use the browser-based

manager or CLI SNMP conguration to setup the rmware-based

SNMP conguration. The following screen is the rmware-embed-

ded SNMP conguration setup screen using browser-based man-

ager:

To launch the above browser-based RAID controller SNMP func-

tion, click on the “System Controls” link. The “System Controls”

menu will show available items. Select the “SNMP Conguration”

item.The rmware-embedded SNMP agent manager monitors all

system events and the SNMP function becomes functional with no

agent software required.

(1). SNMP Trap Congurations

Enter the SNMP Trap IP Address.

(2). SNMP System Congurations

Community name acts as a password to screen accesses to the

SNMP agent of a particular network device. Type in the com-

munity names of the SNMP agent. Before access is granted to a

request station, this station must incorporate a valid community

name into its request; otherwise, the SNMP agent will deny ac-

cess to the system. Most network devices use “public” as de-

fault of their community names. This value is case-sensitive. The

system Contact, Name and Location that will be shown in the

outgoing SNMP trap.

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 196 197

No comments

Areca ARC-1882LP User Manual Page 169